Küptepe WPP, with its environmentally friendly design and high-efficiency generation capability, delivers a strong and consistent contribution to sustainable future goals through renewable energy production.
52% of the electromechanical equipment used in the project has been manufactured in Türkiye; domestic production solutions have been preferred for the generators, towers, blades, and auxiliary equipment. In this way, engineering optimization, shortening of supply times, ease of access to spare parts, and high continuity in operation and maintenance processes have been achieved. This approach strongly demonstrates that the project has been implemented in line with a domestic and national production philosophy.
The first turbine of the Küptepe WPP was commissioned in October 2020, and in the following years, energy production was gradually increased through investments implemented, reaching full capacity. In addition, further capacity expansion investments are also ongoing.
The facility generates an average of 91 million kWh of electricity annually. This production contributes to the region's energy needs as an environmentally friendly and sustainable energy source.
Within the scope of the project: 3 units of Nordex N131 model turbines, each with a capacity of 3.9 MW and a hub height of 120 meters; 2 units of Nordex N163 model turbines, each with a capacity of 7 MW and a hub height of 118 meters, have been utilized.
These turbines represent modern wind technologies distinguished by high performance and low maintenance requirements.
Technical Specifications
| Licensed Installed Capacity | 25.7 MW |
| Average Annual Expected Generation | 91 Million kWh |
| Ratio of Equipment Manufactured in Türkiye | 52% |
| Annual Carbon Reduction | 21,900 Tons |
| Turbines | 3 × Nordex N131 (3.9 MW, 120 m hub height) + 2 × Nordex N163 (7 MW, 118 m hub height) |
| Coordinates | 41°12'38"N, 28°24'40"E |
25.7 MW
Installed power
91 million kWh
Annual output